Product Line: Beam Towers

FEATURES

BT Series Beam Tower

BT-150 4.5 ft. Tower
BT-200 6.5 ft. Tower

The BT Series Beam Tower is a rugged discreet enclosure for the range of "Intelligent" Synchro-Quad and Super Twin photoelectric beams. Its sleek, all black design provides an attractive, aesthetically pleasing appearance that actually increases the security level of the system.

Total Flexibility

The tower can enclose up to four sets of Synchro-Quad or ten sets of the Super Twin series photobeams to form a wall of detection to a maximum of 660 ft. of coverage outdoors and 1980 ft. indoors. The enhance mounting options, photobeams can be mounted back-to-back within the enclosures.

High Impact Plastic

The towers are made of high impact plastic to resist attacks from intruders or vandals.

Mounting Ease

Mounting the enclosure is made easy by the twin opposed steel footings that are secured to a poured foundation with concrete anchors. This allows you to trench up the tower and pipe a conduit of wires right through the base for ultimate security.

Conduit Options

For those situation where conduit must be above ground, the Conduit Option is a 1.5 inch extension base that will accept 3/4 inch EMT box connectors.

Hardware

Hardware is supplied to mount the Synchro-Quad or Super Twin photobeams to the extruded aluminum support. A track system runs the full length of the support to allow custom mounting.

Tamper Protection

The top for the enclosure is secured to the support and holds the shields in place. A tamper switch protects the under top cover.

Heater

For locations that suffer fog, rain, snow, ect., a vortex heater is available to maintain a clear signal path for the IR beam.

Specifications